The maximum application voltage is 200V or 500V, the input power is 150,
300, 600 or 1000W. The input current is 30A for 150W, 60A for 300W, 120A
for 600W or 200A for 1000W.
SW(switching) operation is available in the CC or CR discharging mode.
It features the maximum response of 10µs (in the CC discharging mode).
Storing on panel in the memory facilitates easy sequence operation.
Every model allows analog control according to external voltage (0 to
10V) and external resistance (0 to 10kOhm).
Every model has the general purpose interface bus GP-IB as the standard
feature.
A maximum of five units can be connected in the parallel master slave
operation mode.
Three protective functions are available: UVP (Under Voltage
Protection), OCP (Over Current Protection) and OPP (Over Power
Protection).
Six alarm functions are available: RCP (Reverse Connection Protection)
alarm, OPP (Over Power Protection) alarm, OVP (Over Voltage Protection)
alarm, OCP (Over Current Protection alarm, OHP (Over Heat Protection)
alarm and UVP (Under Voltage Protection) alarm.
The current rise time of the load side can be adjusted according to the
rise time of the output voltage, when test the rise time of switching
power supply.
|
Model |
PEL151-201 |
PEL301-201 |
PEL601-201 |
PEL102-201 |
| Input Power |
0 to 150 W |
0 to 300 W |
0 to 600 W |
0 to 1000 W |
| Input Voltage Range |
CR Mode:0 to 200V, CC/CP/CV Mode:1.5
to 200V |
| Input Current Range(Front/Rear
Terminal) |
0 to 30 A / 0 to 30 A |
0 to 30 A / 0 to 60 A |
0 to 30 A / 0 to 120 A |
0 to 30 A / 0 to 200 A |
| Constant Current Mode |
Range/Resolution |
H Range: 30 A: 0 to 30 A / 1 mA 150 W max
L Range: 0.3 A: 0 to 0.3 A / 10 µA 1.5 W max |
H Range: 60 A: 0 to 60 A / 2 mA 300 W max
L Range: 0.6 A: 0 to 0.6 A / 20 µA 3 W max |
H Range: 120 A: 0 to 120 A / 4mA 600W max
L Range: 1.2 A: 0 to 1.2 A / 40µA 6 W max |
H Range: 200 A: 0 to 200 A / 5 mA 1000W max
L Range: 2 A: 0 to 2 A / 50 µA 10 W max |
| Accuracy |
±0.2% of SET ±0.3% of FS (0to40°C) |
| Ripple Noise (1MHz) |
H Range 10 mA rms / L Range 1 mA rms |
H Range: 20mA rms / L Range: 2mA rms |
H Range: 30mA rms / L Range: 3mA rms |
| Stability |
±0.1% of FS (typ) |
±0.25% of FS (typ) |
±0.35% of FS (typ) |
| Constant Resistance Mode |
Range |
H Range: OPEN, 1.5 k Ohm to 50mOhm
L Range: OPEN, 150 k Ohm to 5Ohm |
H Range: OPEN, 750 Ohm to 25 m Ohm
L Range: OPEN, 75 k Ohm to 2.5 Ohm |
H Range: OPEN, 375 Ohm to 12.5 m Ohm
L Range: OPEN, 37.5 k Ohm to 1.25 Ohm |
H Range: OPEN, 250 Ohm to 8.3 m Ohm
L Range: OPEN, 25 k Ohm to 833 m Ohm |
| Resolution |
H Range: 0.66ms / L Range:6.6µs |
H Range: 1.33 ms / L Range:13.3 µs |
H Range: 2.66 ms / L Range: 26.6 µs |
H Range: 4 ms / L Range: 40 µs |
| Accuracy(23°C ±5°C) |
H Range: ±0.5% of SET ±0.15A Vin/Rin
L Range: ±0.5% of SET ±1.5mA Vin/Rin |
H Range: ±0.5% of SET ±0.3A Vin/Rin
L Range: ±0.5% of SET ±3mA Vin/Rin |
H Range: ±0.5% of SET ±0.6 A Vin/Rin
L Range: ±0.5% of SET ±6 mA Vin/Rin |
H Range: ±0.5% of SET ±0.9 A Vin/Rin
L Range: ±0.5% of SET ±9 mA Vin/Rin |
| Ripple Noise (1MHz) |
H Range: 10m A rms / L Range: 1m A
rms |
H Range: 20m A rms / L Range: 2m A rms |
H Range: 30 mA rms / L Range: 3 mA rms |
| Temperature Factor |
1000PPM/°C (Vin=5V) |
| Constant Voltage Mode |
20V Range/200V Range |
1.5 to 20V/15 to 200V (CC CV Mode, CR
CV Mode) |
| Accuracy/Resolution/Minimum Operating Current |
±0.1% of SET ±0.1% of FS (0 to 40°C)
/ 20V Range: 1mV, 200V Range: 10mV / 1% of Constant Current |
| Constant Power Mode |
Operating Range/Resolution |
H Range:3 to 150 W / 5m W
L Range: 0.03 to 1.5 W / 50 µW |
H Range: 6 to 300W / 10 mW
L Range: 0.06 to 3W / 100 µW |
H Range: 6 to 600 W / 20m W
L Range: 0.12 to 6 W / 200 µW |
H Range: 10 to 1000 W / 25 mW
L Range: 0.2 to 10 W / 250 µW |
| Accuracy (23°C ±5°C) |
±0.4% SET ±1.6%FS ±Vin x Vin / Rin (Vin
x Vin / Rin for Current L Range) (TEMP factor: 1000PPM/ °C (Vin=5V)) |
| Ripple Noise (1MHz) |
H Range : 10 mA rms / L Range : 1 mA
rms |
H Range : 20 mA rms / L Range : 2 mA rms |
H Range : 30 mA rms / L Range : 3 mA rms |
| Short Mode |
Setting Current Value |
0.3/30 A (V1 model CC0V: 18A) |
0.6/60 A ( V1 model CC0V: 18A) |
1.2/120 A (V1 model CC0V: 18A) |
2/200 A ( V1 model CC0V: 18A) |
| SW Mode (Preset A,B) |
Frequency/Accuracy |
1 Hz to10kHz / ±1.5% SET |
| DUTY/Setting Accuracy/Resolution |
5% to 95% / ±1.5% SET / 1% STEP |
| Through Rate Tr/Tf |
Operating Mode |
CC, CR |
| Setting Range |
CC:10 / 20 / 50 / 100 / 200 / 500 /
1000 / 2000µs, CR:OFF / 200 / 500 / 1000 / 2000µs |
| Setting Accuracy |
H : 10, 20µs :-5µ s : ±10µs, L:10,
20µ s : ±10µs, H : 50 to 2000µs : ±20 %, L : 50 to 2000µs : ±30 % |
| Soft Start |
Operating Mode |
CC |
| Setting Range/Accuracy |
0.1 / 1 / 2 / 5 / 10 / 20 / 50 /
100ms / ±30 % of set 100µs |
| Remote Sensing |
|
2.5 V par One Way |
| External Control |
Voltage |
0 to 10 V (Offset gain Adjustable at
Rear Panel. ) It takes approx. 1 Second for Settings at CR Mode |
| Resistance |
0 to 10 k Ohm(It takes approx. 1
Second for Settings) |
| Others |
LOAD ON/OFF, EXT SW |
| Series/Parallel(Master/Slave
Operation) |
Connecting Capability |
Maximum 4 of Slave Units plus 1
Master Unit |
| Added Current Display |
Total Value of Slave Unit(s) and
Master Unit are Displayed at Master Unit Display. Over Write : 2
times/Sec |
| Resolution (L Range/H Range) |
0.1 x N / 10 x N (mA) N: Parallel Unit Numbers. |
0.2 x N / 20 x N (mA) N: Parallel Unit Numbers. |
0.4 x N / 40 x N (mA) N: Parallel Unit Numbers. |
0.6 x N / 60 x N (mA) N: Parallel Unit Numbers. |
| Current Monitor Out |
Linearity |
±1% FS |
| DC Current Measurement |
Range/ (Resolution) |
0.3 / 30 A / (0.1/10 mA) |
0.6/60 A / (0.1/10 mA) |
1.2 / 120A / (0.1/10mA) |
2/200A / (0.1/10mA) |
| Accuracy/Repeat |
±0.2% of rdg ±0.3% of FS (0 to 40°C)
/ 2 Times/Sec |
| DC Voltage Measurement |
Range/Resolution |
0 to 20 V / 1 mV, 20 to 210 V / 10 mV
(Auto Range, Hysteresis at 18 /20 V) |
| Accuracy/Repeat/Temperature Factor |
20V Range : ±0.03 % of rdg ±0.06% of
FS, 200V Range : ±0.03% of rdg ±0.03% of FS (18 to 28 °C) / 2
Times/Sec /
±0.003 % of rdg ±0.003 % of FS/ °C |
| Power Measurement |
Range/Resolution |
1.5, 150 W / 1, 100 mW (Voltage x Current) |
3, 300 W / 1, 100 mW (Voltage x Current) |
6, 600 W / 1, 100 mW (Voltage x Current) |
10, 1000 W / 1, 100 mW (Voltage x Current) |
| UVP (Under Voltage ) |
Range/Resolution |
OFF, -0.5 to 20 V/20 mV |
| OPP (Over Power) |
Range/Resolution |
H Range: 15 to 165W/1W / L Range: 0.15 to
1.65W/10mW |
H Range: 30 to 330W/2W / L Range: 0.3 to
3.3W/20mW |
H Range: 60 to 660 W/4 W / L Range: 0.6 to 6.6
W/40 mW |
H Range: 100 to 1100 W/8 W, L Range: 1 to 11 W/80
mW |
| OCP (Over Current) |
Setting Range/Resolution |
H Range: 3 to 33A/150mA / L Range: 0.03 to
0.33A/1.5mA |
H: 6 to 66A/300mA / L: 0.06 to 0.66A/3mA |
H Range:12 to 132 A/600 mA / L Range: 0.12 to
1.32 A/6 mA |
H Range: 20 to 220 A/1 A / L: 0.2 to 2.2 A/10 mA |
| Protection |
Over Voltage |
Cut Load Off about 230V |
| Over Current, Over Power |
Automatic Resume After 3 Sec of Load
Off |
| Reversed Connection |
Terminate by Parasitic FET |
| Over Heating |
Cut Load Off at 110 °C at Inside Heat
Sink |
| Sequence Memory |
Step/Time/Resolution |
100 / 50 µs to 99h59m59.99995 s,
PAUSE, PASS / 50 µs, Cycle: 1 to 255 |
| Items |
Discharge Mode Pre-set A, B and C
Value, Pre-set A, B and C Switch Selection, Discharge Mode, SHORT
Mode
ON/OFF, LOAD ON/OFF, UVP Setting value, OCP Setting value, OPP
Setting Value, Soft Start Setting Value, Tr/Tf
Setting value, SW Frequency, SW DUTY, CV RANGE, Current RANGE,
External Control Mode (PASS at Auto Sequence Mode) |
| Environmental Request |
Temperature/Humidity |
0 to 40°C / 20 to 85 %RH |
| Power Source |
AC90 to 132 V / AC180 to 250V, 48 to
63 Hz |
| Power Consumption |
Less than 75 VA |
Less Than 77 VA |
Less than 84 VA |
Less Than 100 VA |
| Isolation |
Primary to Body : 1500 VAC 1 Minute,
Primary to Secondary : 2300 VAC 1 Minute |
| Isolation Resistance |
Primary to Body, Primary to Secondary
: 500 VDC More Than 10 M Ohm, Secondary to Body : 250 VDC More Than
5M Ohm |
| Cooling Method |
Cooling Fan |
|
|
|
| Dimensions (Maximum) |
W x H x D: 210 (210) x 124 (141) x
405 (538) (mm) |
W x H x D: 421.5 (421.5) x 124
(132.5) x 405 (538) (mm) |
| Weight |
Approx. 6 kg |
Approx. 7 kg |
Approx. 11 kg |
Approx. 13 kg |
| CC Zero Volts
Discharge Mode (V1 Version for CC0V) |
PEL151-201V1 |
PEL301-201V1 |
PEL601-201V1 |
PEL102-201V1 |
| Terminal |
Front Terminal for CC0V Discharge
Mode |
| Input Current Range |
0-18A |
| Constant Current Mode (H Range Only) |
Range/Constant Resolution |
0-18A/1mA 100W max |
0-18A/2mA 200W max |
0-18A/2mA 400W max |
0-18A/2mA 600W max |
| Ripple Noise (1MHz) |
20mArms |
30mArms |
| Through Tr/Tf |
Constant Range |
CC :500/1000/2000µs |
| Environmental Request |
Power Consumption |
Less Than 250VA |
