|
| |
DCS-2000 Series Digital
Oscilloscopes
DCS-2080 : 80MHz
DCS-2150 :
150MHz
DCS-2250 :
250MHz
25GS/s Sampling Rate per channel
5.7
inch LCD Display
Dual
Digitiser
USB,
RS-232C, Printer interfaces
FFT
analysis
32kBytes memory depth
The DCS-2000
Series Digital Oscilloscopes offer a wide range of bandwidths from 80MHz to
250MHz with a 25GS/s maximum equivalent time sampling rate, 32kBytes per channel
of memory, 10ns peak detection for glitch capture, FFT (Fast Fourier Transform)
function and an easy to-use, full featured user interface.
The design
incorporates a 16-bit high-speed microprocessor that enables it to acquire up to
150 waveforms per second and instantly update the waveform display. The large
record memory (32kBytes) allows for high resolution capturing of long time
events and captured waveforms with zoom for more detailed analysis.
The built-in 10ns peak detection circuit facilitates the capture of high
frequency noise at a low speed timebase. The waveform can then be magnified to
analyse the noise using zoom-in function.
A
communication module provides a USB, RS-232C interface and hardcopy printer. The
USB function provides high-speed data communication, RS-232C provides a low cost
interface. The
DCS-2000 Series is ideally suited to applications in electronic design and
development, education in colleges, universities and training centres, repair
and maintenance, production, quality control and satisfies increasing needs of
higher performance and reliability at an affordable price.
|
Description |
DCS-2080 |
DCS-2150 |
DCS-2250 |
|
ACQUISITION |
Max.
Sample rate |
200MS/s for one channel only, 100MS/s/CH (real time) 25GS/s/CH (equivalent) |
|
Record length |
Long
Memory Max. 10kBytes/CH |
Long
Memory Max. 32kBytes/CH |
|
Peak
detect |
Captures & displays as narrow as 10ns GLITCH |
|
VERTICAL |
Frequency bandwidth |
DC-80MHz (40MHz at 2mV/div |
DC-150MHz (40MHz at 2mV/div |
DC-250MHz (60MHz at 2mV/div |
|
Input Channel |
CH1,
CH2 |
|
VOLTS/DIV |
2mV/div ~ 5V/div |
|
Input impedance |
1Mohm
±1.5% //
Approx. 16pF |
|
Max.
Input volt |
400V
(DC+AC Peak) (AC < 1kHz) |
|
Accuracy |
±3% |
|
Input coupling |
DC,
AC, GND |
|
Rising time |
Approx. 3.5ns |
Approx. 2.3ns |
Approx. 1.4ns |
|
MATH |
|
Arithmetic (ADD, SUBTRACT, INVERSION)
FFT
: Hamming, Hanning and Rectangular Window
Pass-Fail : Editable waveform zone |
|
HORIZONTAL |
TIME/DIV |
Equivalent : 2ns/div ~ 0.1µs/div
Real
time : 0.25µs/div
~ 0.1 s/div
Roll mode :
0.2s/div ~ 5s/div |
|
Resolution |
80ps |
|
Accuracy |
0.01% |
|
Pre
trigger |
Max.
10div |
|
Magnification |
ZOOM
IN / OUT |
|
TRIGGER |
Mode |
AUTO, NORMAL, SINGLE |
|
Coupling |
DC,
AC, LF REJECT, HF REJECT |
|
Type |
Edge, TV |
|
SLOPE |
Rising, Falling |
|
Level |
Manual setting or Automatic 50% setting |
|
Source |
CH1,
CH2, EXT, LINE |
|
Sensitivity |
TRIGGER |
FREQUENCY |
SENSITIVITY |
|
5mV ~ 5V/div |
2mV/div |
|
INTERNAL
(CH1, CH2) |
DC ~ 10MHz |
0.5 div |
0.5 div |
|
10MHz ~ 80MHz |
1.5 div |
1.5 div
(at 10MHz ~ 40/60MHz) |
|
80MHz ~ MAX. BW |
2.0div |
|
EXTERNAL |
DC ~ MAX. BW |
0.2Vp-p (0.5Vp-p at
150MHz ~ 250MHz) |
|
DISPLAY |
|
5.7”
MONO LCD (320X240) CCFL Backlight |
|
MENU |
Display |
Type Dots, Vectors
Format X-Y, Y-T
GRID Full, Cross, Board
Contrast Control possible |
|
SAVE/RECALL |
10
Setups, 10 Waveforms. This function is able to save waveform and setting
state of present working environment and recall by the user. Factory setup
and recall |
|
UTILITY |
Self
Calibration, System condition. |
|
Cursor |
Type
: time, frequency, voltage. Source : CH1, CH2. |
|
Acquire |
Peak
detect : 5µs/div
~ 5s/div(ON/OFF)
Average : 2
~ 128
Persistence : 0.25µs/div
~ 0.1s/div (ON/OFF) |
|
Measure |
Max.
10 parameter auto measurement (pk-pk, RMS, Mean, Frequency, Rising time,
Falling time, Period, Positive width, Negative width, Duty) |
|
HOT-KEY |
AUTO
SET |
Vertical, horizontal & Trigger setting |
|
RUN/STOP |
Waveform hold |
|
SINGLE |
Bandwidth 20MHz |
|
HARDCOPY |
Hardcopy through printer port or RS-232C port for thermal printer |
|
INTERFACE |
RS-232C |
Flow
control : XON / XOFF, HARDWARE
DATE
BIT : 8, 7
STOP
BIT : 1
PARITY : NONE, EVEN, ODD
BAUD
RATE : 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
|
SPP |
Standard Parallel Port, PCL 3 support Printer (Hardcopy) |
|
USB |
Ver.
1.1 |
|
POWER |
Power Supply |
90V
AC ~ 250V AC |
|
Frequency |
48Hz
~ 440Hz |
|
Power Consumption |
35W |
|
WEIGHT |
|
Approx 5.5kg |
|
SIZE |
|
338(W) X 167(H) X 370(L) mm |
|
EMC |
|
CE
(EN 61326) |
|
SAFETY |
|
CE
(EN 61010-1), meet UL 3111-1 |
|
AMBIENT CONDITION |
Temp
Range for Rated Operation |
+10°C
to +35°C (+50°F to +95°F) |
|
Max.
Ambient Operating Temp |
0°C
to 40°C (+32°F to +104°F) |
|
Max.
Storage Temp |
-10°C
to 60°C (+14°F to +140°F) |
|
Humidity Range for Rated Operation |
45%
to 85% RH |
|
Max.
Ambient Operating Humidity |
35%
to 85% RH |
|
