CS 5105, CS
5065 100MHz, 60MHz Oscilloscopes
The CS 5105 and CS 5065
Oscilloscopes offer bandwidths of 100MHz and 60MHz respectively, which makes
them ideal for applications requiring high quality and performance but at a low
price. These Oscilloscopes are ideal for areas such as production line,
development, service and education. Both models have two channels with
comprehensive triggering and are supplied complete with 2 high quality probes.
·
DC to 100MHz
(CS 5105) / 60MHz (CS 5065) Bandwidth.
·
2CH – Dual
Trace + Z Axis.
·
6”
Rectangular high luminance CRT with internal graticule.
·
Vertical
modes CH1, CH2, ADD, ALT, CHOP.
·
X –Y Mode.
·
Sensitivity
2mV (CS 5105) / 1mV (CS 5065).
·
Dual time
base.
·
Delay sweep
+ Sweep magnification (x10).
·
Trigger
modes C1, CH2, TV-V, TV-H.
·
Supplied
complete with probes.
CS
5105 CS 5065
CRT
|
Configuration and Useful Screen |
6-inch rectangular screen
with internal graticule: 8x 10div(1div=1cm), marking for measurement of rise
time, 2mm subdivisions along the central access |
|
Acceleration Potential |
+10.5kv approx. (ref.
Cathode) |
+10kv approx. (ref.
Cathode) |
|
Phosphor |
P31 (Standard) |
|
Focusing |
Possible |
|
Trace Rotation |
Provided |
|
Intensity Control |
Provided |
|
Z-AXIS INPUT (Intensity
modulation) |
Input signal |
Positive going signal
decreases +5Vp-p or more signal cases noticeable modulation at normal
intensity settings |
|
Bandwidth |
DC to 3.5MHz (-3dB) |
|
Coupling |
DC |
|
Input Impedance |
25W |
20kW
-30kW
typical |
|
Maximum Input Voltage |
20V (DC + peak AC) |
30V (DC + peak AC) |
VERTICAL
DEFLECTION |
Bandwidth
(-3dB)
|
DC(10Hz) to 100MHz
DC(10Hz) to 20MHz (2mV
Range) |
DC(10Hz) to 60 MHz
DC(10Hz) to 20MHz (x5 Mag
on) |
|
Modes |
CH1, CH2, ADD, DUAL, CHOP |
CH1, CH2, ADD, DUAL
(CHOP; Time/Div switch-0.2s to 5ms, ALT; Time/Div 2ms to 0.1us |
|
Deflection Factor |
2mV/Div to 5V/Div in 11
calibrated steps of 1-2-5 sequence. |
5mV/Div to 5V/Div to 1
mV/Div (x5 Mag on) in 10 calibrated steps of 1-2-5 sequence |
|
Accuracy |
±3% |
±3% (±5%:x5 Mag on) |
|
Input Impedance |
Approx. 1MW
in parallel with
25pF |
|
Maximum Input Voltage |
Direct: 250V (DC+ peak
AC) |
|
Input Coupling |
AC-GND-DC |
|
Rise
Time |
3.5ns or less (17.5ns or
less:2mV/div) |
5.8ns or less (23ns or
less: x5 MAG) |
|
CH1
Out |
20mV/Div into 50W
: 50Hz to 30MHz (-3dB) |
20mV/Div into 50W
: DC to
10MHz(-3dB) |
|
Polarity Inversion |
CH2 Only |
|
HORIZONTAL
DEFLECTION |
Display Mode |
A,A int B,B TRIG’ D,X-Y |
|
Time Base
A |
0.1us/Div to 0.2s/Div in
20 calibrated steps of 1-2-5 sequence |
|
Hold-off
Time |
Variable with hold-off
control |
|
Time Base
B |
0.1us/Div to 10us/Div in
7 calibrated steps of 1-2-5 sequence |
|
Delay
Sweep Position |
1Div or less – 10Div or
more |
|
Delay Time
Jitter |
Better than 1:20000 |
|
Sweep Magnification |
10 times (Maximum sweep
rate: 10ns/Div) |
|
Accuracy |
±3% (additional error for
magnifier ±2%) |
|
TRIGGER
SYSTEM |
Modes |
Auto, Norm, TV-V, TV-H |
|
Source |
CH1, CH2, LINE, EXT |
|
Coupling |
AC |
|
Slope |
+ or - |
|
Sensitivity and Frequency Auto, Norm |
|
|
30Hz-10MHz |
10MHz-100MHz |
|
INT |
0.48div |
1.5div
|
|
EXT |
0.2Vp-p |
0.6Vp-p |
|
|
20Hz – 2MHz
|
20Hz – 60MHz
|
|
0.5div
|
1.5div
|
|
0.15Vp-p |
0.3Vp-p |
|
|
TV-V, TV-H |
At least 1Div or 1.0Vp-p |
|
External Trigger Input Impedance |
1MW
in parallel with approx. 22pF |
1MW
in parallel with
approx. 30pF |
|
Maximum Input Voltage |
250V (DC+AC peak) |
X-Y
OPERATION |
Sensitivity |
Same as vertical
deflection for both, X-Axis (CH1) and Y-AXIS (CH2) |
|
X-Axis Bandwidth |
DC to 2MHz |
DC to 500kHz (-3db) |
|
X-Y
Phase Difference |
3°
or less (at DC to 100kHz) |
3°
or less (at DC to 50kHz) |
CALIBRATOR
|
Probe Adjustment |
Approx, 1kHz Square wave,
0.5Vp-p ±3%, duty ratio: 50% |
POWER
SUPPLY |
Line
Voltage Range |
Voltage Range |
FUSE (250V) |
|
100 (90 – 110V) AC |
2A 250V |
|
120 (108 – 132V) AC |
2A 250V |
|
220 (198 – 242V) AC |
1A 250V |
|
230 (207 – 250V) AC |
1A 250V |
|
Line
Frequency |
50 / 60Hz |
|
Power Consumption |
Approx. 55W |
Approx. 50W |
|
PHYSICAL
CHARACTERISTIC |
Weight |
8.5kg |
7.7kg |
|
Size |
320mm(W) x 140mm(H) x
430mm(L) |
|
OTHERS |
Accessories Supplied |
Operator’s manual (1),
Spare fuse (2), Power cord (1), Probes (2) |
